Logo TSCry

Cryogenic Pumping Systems

Filling Equipment for Industrial & Medical Gases

We design and manufacture equipment for the transfer and use of cryogenic and compressed gases.
Cryogenic Pumps
Our equipment is made by expertise and passion, to provide consistent benefits to the gas industry.
Gas Engineering Experts
We are among the leading experts in Italy in plant engineering for the production, transfer and packaging of technical, medicinal and ultra-high purity gases, areas that require the most advanced design, safety and quality standards.
Proven Track Record

We have handled over 1,800 orders and hundreds of installations in under two decades, efficiently coordinating our staff and third-party professionals while collaborating closely with our principals.

Custom Solutions Delivery
We translate customers’ specific needs into technological solutions. Contextually, we prepare technical and economic feasibility estimates and also offer regulatory and legislative framework analysis as an integral part of our service.

Cryogenic Pumps

RP T3/T6 SERIES
CRYOGENIC PISTON PUMPS

The RP series comprises a range of cryogenic piston pumps based on a highly appreciated traditional design.

They have a slightly inclined configuration in relation to the horizontal, proven by more than 30 years of reference in the use for filling vessels with compressed gases such as argon, nitrogen and oxygen. Available in multiple models and variants, with flowrates up to 13 l/min and discharge pressures up to 330 barg, RP T3/ T6 pumps are an attractive solution for the production of compressed gases from their liquid phase.

RP-T3-T6-SERIES
RP D7.5 SERIES
CRYOGENIC PISTON PUMPS WITH OIL LUBRICATED DRIVE

Thanks to the D7.5 crank drive the RP D7.5 series excellently extends TS CRYO’s RP cryogenic pump range to higher flow rates or discharge pressures.

Available in multiple models and variants, with flowrates up to 75 l/min and discharge pressures up to 420 barg, RP D7.5 pumps are an attractive solution for high-draw and/or ultra-intensive duty applications.

RP D7.5 SERIES
RPS SERIES
PISTON PUMPS FOR CO2 & N2O

The RPS series includes a range of piston pumps specifically for CO2 and N2O. They are based on a popular standard design, with a configuration slightly inclined to the horizontal, proven by over 30 years of reference in the use for filling containers with compressed fluids such as carbon dioxide and nitrous oxide.

Available in different models and variants, with delivery pressures up to 100 bar g, RPS pumps are an attractive solution for carbon dioxide and nitrous oxide filling stations and other applications demanding high pressure CO2 and N2O.

RPS SERIES
CP SERIES
CRYOGENIC CENTRIFUGAL PUMPS

Ideal for transferring cryogenic liquefied gases at flow rates up to 500 l/min and differential heads up to 360 meters, our CP series centrifugal pumps are a robust long-term solution for both stationary and mobile installations, such as tankers or transportable skids.
Standard configuration is equipped with a low noise gearbox and an integrated boost system for low NPSH operation.

Hydraulic drive available as an alternative to electric motor, suitable to run with truck PTO shaft.

DCP SERIES
CRYOGENIC CENTRIFUGAL PUMPS

Ideal for transferring cryogenic liquefied gases at flowrates up to 1000 l/min and differential heads up to 70 meters, our DCP series centrifugal pumps are a robust long-term solution for both stationary and mobile installations, such as tankers or transportable skids.
Standard configuration is equipped with a low noise and an integrated boost system for low NPSH operation.

Hydraulic drive available as an alternative to electric motor, suitable to run with truck PTO shaft.

Filling Equipment

CYLINDER FILLING EQUIPMENT
MANUAL & AUTOMATIC FILLING STATIONS FOR COMPRESSED GASES

TS designs and manufactures full turn-key stations for the filling of cylinders, bundles and tube trailers with compressed gases. Gas compression can be alternatively be provided by a cryogenic pump followed in series by on ore more vaporizers, or by a gas compressor.

While different configurations of gas management panels and filling ramps are available, depending on the type of gas to be packed and the type of receiving container to be filled.
Both manual and automatic operating modes are available for conducting of the filling process.

S-DCP SERIES
CRYOGENIC SUBMERGED CENTRIFUGAL PUMPS

Conceived with special considerations for LNG applications, TS CRYO’s new range of submerged pumps are a great solution also for LAR and LIN.

Debuting with a two stages model with a 13 kW variable speed submerged motor, this range begins by offering an average flowrate of 360 l/min with a differential head up to 270 m.
The dimensional design allows these pumps to be also housed in third-party manufactured sumps, making them an excellent candidate as retrofit or replacement pumps.

In order to pursue maximum efficiency TS offers in conjunction with such pumps its own super-insulated vacuum sumps.

To be launched on the market in 2024.

Our contacts

ITALY – 20853 – Biassono (MB)
Via dei Gelsi, 41/43

Tell us about your project

Do you need to build a new installation, replace, extend or perform extraordinary maintenance on an existing one?

Fill in the form below and we will quickly get back to you to gather the necessary information to meet all your needs.

Nome(Obbligatorio)
Privacy(Obbligatorio)

TS Italia Srl designs and manufactures systems, equipment and plants for the storage and transfer of cryogenic liquids and for the production, distribution and delivery of related gases for use in industrial processes as well as in health and scientific applications.

Solutions

Head Office

Legal Menù

TS ITALIA SRL - 20853 Biassono (MB) - Via dei Gelsi, 41/43 - Tel. +39 039 23 24 066 - info@tsitalia.it -
VAT no. and Nr. Iscr. Reg. Imp. of Milan 04231470966 - Cap. Soc. Euro 70,000 i.v.
Copyright 2022 TS Italy, All Rights Reserved